روش استفاده از Fence Panel Calculator — fence panels and posts do I need?
Estimate full fence panels, posts and panel cost from the measured run and actual panel module.
Panels = fence run ÷ panel width, rounded up. A straight independent run generally needs one more post than panels before gates and corners are considered.
Estimate full fence panels, posts and panel cost from the measured run and actual panel module. The linked Sellible tool keeps the fields, units and output together so the assumptions can be reviewed before the result is used.
- 1
Measure each straight fence run separately.
- 2
Use the real installed panel width or bay module.
- 3
Price panels and schedule posts, gravel boards and fixings.
Example values and result
These values demonstrate the method; replace them with measurements, rates or file details that match the real task.
- Fence run
- 20 m
- Panel width
- 1.8 m
- Whole panels
- 12
- Straight-run posts
- 13
The final panel may need cutting. Corners, gates, shared posts and changes in level need to be reflected in the actual layout.
دقت و راهنمای عملی
- Mark corners, ends, gates and level changes.
- Check post depth, services and ground conditions.
- Confirm local boundary and planning responsibilities.
Common mistakes
- Adding a new post for each run without checking shared corners.
- Ignoring panel cuts on a non-multiple run.
- Using a quantity estimate as permission to build on a boundary.
A free account makes repeat tasks simpler
Email-link sign-in keeps file jobs, downloads, support and usage available across devices. Browser calculators remain free.
پرسشهای متداول
Is Fence Panel Calculator free?
Yes. This calculator or browser utility is free and does not use processing credits.
Can I use this guide and Fence Panel Calculator on a phone?
Yes. The guide, inputs, results and calls to action are responsive and keyboard accessible on current phones, tablets and desktop browsers.
Should I order or make a decision from the estimate alone?
No. Mark corners, ends, gates and level changes. Check post depth, services and ground conditions. The calculation is a planning aid rather than professional or regulatory approval.
How should I check the result?
Keep the source values and units visible, compare the result with supplier or project information, and retain enough precision until the final purchasing or reporting step.